Flaem SfigmoLife Pro, Руководство пользователя

Страница: 19 / 26

35
34
6
.Repeat steps 2 and 3 to set the [HOUR]
and [MINUTE].
8 .After the unit is set,the LCD will display
“dOnE” first, then display all the settings
you have done and then it will turn off.
7
.Repeat steps 2 and 3 to set the [UNIT].
MEASUREMENT
Rest for 5 minutes before
measuring.
Wait at least 3 minutes between
measurements. This allows your
blood circulation to recover.
For a meaningful comparison,
try to measure under similar
conditions. For example, take daily
measurements at approximately
the same time, position of upper
arm, or as directed by a physician.
Tie the cuff
1.
2 .The cuff should be snug but not
too tight. You should be able to
insert one finger between the
cuff and your arm.
3
.Sit comfortably with your tested
arm resting on a flat surface.
2~3cm
.Patients with Hypertension:
The middle of the cuff should be
at the level of the right atrium of the heart;
Before starting measurement, please sit
comfortably with legs uncrossed,
feet flat on the floor, back and arm supported.
4
Pul/min
MEMORY
TIME/DATE
S
M
START
STOP
Pul/min
MEMORY
TIME/DATE
S
M
START
STOP
A/B
A/B
Pul/min
MEMORY
TIME/DATE
S
M
START
STOP
Pul/min
MEMORY
TIME/DATE
S
M
START
STOP
A/B
A/B
Pul/min
MEMORY
TIME/DATE
S
M
START
STOP
A/B
Tie the cuff on your upper arm,
then position the tube off-center
toward the inner side of arm in
line with the little finger. Or
position the artery mark over
the main artery (on the inside of
your arm). Note: Locate the main
artery by pressing with 2 fingers
approximately 2 cm above the
bend of your elbow on the inside
of your left arm. Identify where
the pulse can be felt the stron-
gest. This is your main artery.
BEFORE YOU START