Flaem SfigmoLife Evo, Руководство пользователя

Страница: 17 / 24

31 30
Setting Date, Time and Measurement Unit
It is important to set the clock before using your blood pressure monitor,
so that a time stamp can be assigned to each record that is stored in the
memory. (The setting range of the year :2014—2054 time format:12 H)
1.
2
.Press “M” button to
to change the [YEAR].
Each press will increase
the digit by one in a
cycling manner.
3
.When you get the right
year, press “S” button
to set down and turn to
next step.
BEFORE YOU START
4
.Repeat steps 2 and 3 to set [MONTH] and [DAY].
5
.Repeat steps 2 and 3 to set [HOUR] and [MINUTE].
6
.Repeat steps 2 and 3 to set the [UNIT].
BEFORE YOU START
START
STOP
START
STOP
START
STOP
START
STOP
START
STOP
START
STOP
START
STOP
START
STOP
START
STOP
When the batteries are first installed, the
device will automatically prompt you to set
the [YEAR] first.
Or if the batteries have already been
installed, when the monitor is off, hold
pressing “S” button about 3 seconds to
enter the mode for year setting.
Or when the monitor is off, press “S” button
shortly, it will display the time. Then hold
pressing “S” button to enter the mode for
year setting.
(Notes: 1.During the process of setting, you
can press “START/STOP ” button to stop
setting at any time.
2. If there is no operation during the process
of setting, it will turn off within 1 minute.
3. It is necessary to set the date and time
for the unit every time when the batteries
are initially installed or replaced.)