FKI ADF-21, Инструкция по эксплуатации

Страница: 22 / 44

21
Error codes
Error codes
In the event of a fault in the appliance, an error mes-
sage like those shown here will appear. Find the er-
ror code in the below chart and try to rectify the er-
ror or contact service.
ERROR
CODE ERROR CAUSE REMEDY
01 Communication er-
ror Graphical user interface
does not respond to con-
trol print. Turn off the power for 10 seconds us-
ing the switch on the side of the ap-
pliance. If the error persists, contact
service.
02 No status report The control print does not
deliver status reports to
the graphical user inter-
face. Turn off the power for 10 seconds us-
ing the switch on the side of the ap-
pliance. If the error persists, contact
service.
11 Oil overheated The solid state relay may
have short-circuited. Contact service.
13 Temperature sen-
sor error The measured values are
either too high or too low
in relation to those ex-
pected. Contact service.
20 Motor is over-
loaded The motor is worn or there
is too much friction on the
lever. Try cleaning the appliance's moving
parts.
If the error persists, contact service.