FK Motors FK 200, Руководство пользователя

Страница: 21 / 38

Drive chain adjustment
●Loosen the connecGng rod locking nut and rear axle shaP nut, then
turn the adjusting bolt.
●Twist, rotate and adjust both sides of the adjustment nuts to ensure
that the position of the chain adjuster are at identical marking.
Next, tighten the sleeve nuts and rear axle shaft nut. Recommended
torque setting for the rear axle shaft nut is 60-80N.m.
●The rear brake level adjustment nut must be adjusted to the correct
settings to ensure effective braking after adjusting the position of the
drive chain, else it might affect the free-play movement of the brakes.
Drive chain cleaning and lubrication
●Locate the chain master link, use a pair of pliers to snap it open and
remove the chain.
●Wash the chain with washing solvents, then air dry it.
●Inspect the chain rigidness and any signs of wear and tear (Thinning
of the chain joints). Also inspect the chain buckles and rollers for any
signs of cracking or chain slipping. If the drive chain show signs of
wear and tear, it must be replaced immediately.
●Apply a large amount of oil or chain lubricant to lubricate the chain.
●During re-installation, reverse the steps mentioned above.
When the chain master link is installed.
back, the opened end of the chain link
should be in the opposite direction of
of the chain movement while moving
forward
.
Brake fluid inspection
Insufficient brake fluid will allow air to enter the brake system leading to
failure of the brakes. Check the quantity of the brake fluid before riding off.
If there is insufficient amount of brake fluid, add or top-up accordingly.
Keep the following guidelines in mind during the inspection and topping-up
process:
1. The rotation handlebar and the upper end of the brake master cylinder
should be kept in a horizontal position during inspection of the quantity
of brake fluid.
2. Only recommended brake fluid are allowed to be used to reduc
damage to the rubber oil seals, which will cause the brake fluids to leak
and lead to poor braking performance.
Recommend brake fluid: DOT3# or DOT4#
Front & rear brakes adjustments
Page 20