Airplane Manual FK 12 S2
FK Lightplanes
Revision FE
Handling, Serv.& Maint.
page 8-6
8.16.
Assembly of the Aircraft
Assemble the aircraft as follows:
Check all parts for damage
Check fuselage and wings for loose or foreign objects
Connect the pitot tube line (only if the wing has been removed
completely)
Unfold both wings and close / secure the upper and lower bolts
Connect and secure the ailerons; access to the ailerons via caps beside
the rudder pedals
Fold up and close the fuselage covers
Fold down the (optional) cover at the middle section of the upper wing’s
trailing edge
Check the flight controls and the flaps
To disassemble the aircraft follow above mentioned steps in reverse order.
If the large closed canopy is installed, the wings can only be folded, if the
rods between the lower and the upper aileron are disconnected. The upper
ailerons must be moved up and the lower ailerons must be moved down,
otherwise the canopy will be damaged.
The folded wings can be connected to the aft fuselage with the special
stowing rod.
For transport in a trailer use additionally affixture to prevent wing damage.
