Owner’s manual
|
WiP 160/160C
Wireless Microphone Systems
WiP 160/160C
Wireless Microphone Systems |
Owner’s manual
8
WiP 160/160C
TIPs
∙ Maintain a line of sight between transmitter and antenna.
∙ Avoid placing the receiver near metal surfaces or any digital equipment (CD players, computers, etc).
∙ Keep the receiver away from the wall and over 1m to the ground.
∙ Transmitting devices such as cellular phones and two-way radio may interfere with wireless audio transmission.
Keep the transmitter and receiver away from this and other potential sources of interferences.
TROUBlesHOOTINg
Issue
Indicator Status
Solution
No sound or faint
sound
No Transmit
Turn on transmitter.
Make sure the +/- indicator on battery match the
transmitter terminals.
No Receive
Make sure AC adapter is securely plugged into electrical
outlet and into DC input connector on receiver rear
panel.
Receiver RF indicator glows
Turn the receiver ON.
Turn up the Gain adjustment switch in the transmitter.
Check the power connection of the receiver
and amplifier or mixer.
Receiver RF indicator OFF,
transmitter ON
Check the receiver and transmitter whether use the
same channel.
Take the receiver away from any metal object.
Check the line of sight between receiver and transmitter.
Move the transmitter closer to the receiver.
The battery power indicator
light flashes
Replace transmitter batteries.
Distortion or
unwanted noise bursts
Receiver display indicators
antenna activity
Remove nearby sources of RF interference (CD players,
computers, digital effects, in-ear monitor systems, etc.).
Distortion level
increases gradually
Receiver RF indicator OFF,
transmitter ON
Replace transmitter batteries.
Sound level different
from cabled guitar or
microphone, or when
using different guitars
Adjust transmitter gain and receiver volume as
necessary.