RMD802 - RMD802BH
| Owner’s manual
9
Antenna
This permanently attached transmitter antenna should be fully extended during normal operation.
Status Indicator
This LED displays the operation mode:
- GREEN: Normal Operation
- RED: Mute
- Flashing RED: Low Battery
POWER/MUTE Switch
Press and hold to turn the unit on or off.
Press and release to mute or unmute the the transmitter.
MINI 4P Connector
Pin 1: GND
Pin 2: Phantom power supply for condenser microphone
Pin 3: For guitar, bass and keyboards
Pin 4: For dynamic or condenser microphone
IR Receiving Section
This window is used to capture the infrared signal sent from the receiver during the IR UP/DOWN to channelize the
transmitter.
Input GAIN Control
This control adjusts the transmitter input sensitivity to work with microphone and instruments inputs. For optimal
performance, using the included screwdriver, set the input GAIN control to where you can see the RF display of receiver
screen become to full light, then turn down until the RF display not full light (less than five).
Driver
Designed for use in adjusting the MIC input GAIN control.
7
BODYPACK TRANSMITTER
C
A
1
2
3
4
B
6
5
7
1
1
2
3
4
5
6
D
C
A
B
D
