FIVE OCEANS ATLANTIC 600, Руководство пользователя

Страница: 10 / 20

10
HORIZONTAL WINDLASS MANUAL VOLUME ONE
6- Operation 6- Operation
6.1 Manual Control
Use this method for quicker anchor deployment, in an emergency involving loss of power or to
save battery power. Observe maritime anchor deployment safety rules.
6.2 Power Down/Up
1. Turn off all power to motor windlass and release any anchor locks.
2. When safe insert the Five Oceans wrench in to the capstan drive cap. Rotate clockwise to
grip the gypsy and anticlockwise to free the gypsy controlling the rate of descent of the
anchor. Once deployed adjust desired scope if using a rope/chain, lock the clutch by turn-
ing the drive cap clockwise and engage the anchor locks. Remove the wrench handle.
To release anchor:
1. Check unit is not in manual mode.
2. Release any anchor locks.
3. Engage the circuit breaker/isolator.
4. Press down button continuously until you’ve reached the necessary length of chain/
rope.
5. Disengage the circuit breaker/isolator.
6. Lock anchor locks.
To retrive anchor:
1. Release any anchor locks
2. Engage the circuit breaker/isolator.
3. Press the UP button continuously to retrieve the anchor.
4. Disengage the circuit breaker/isolator.
5. Lock anchor locks.
WARNING! Isolate ( Tu rn off) the
windlass using circuit breaker / isolator.
WARNING! Trapping, crushing or
entanglement danger whiIst operating
windlass manually or under power
WARNING! Always remove
wrench handle after use.
DONT FORGET
1 2 3