Fitness Reality X-Class 710ST, Руководство пользователя

Страница: 19 / 33

17
ASSEMBLY
Step 7
Tightening the Hardware of steps 4, 5, and 6:
To ensure smooth and quiet operation of the elliptical do the following:
1. Turn the Flywheel (66) 3 times to allow the parts of steps 3, 4, 5, and 6 to self-align.
2. Reference the tool images on each step that are needed.
3. First tighten the hardware of the left side first of the machine in the following order according to the
step below:
a. Step 3
b. Step 4A
c. Step 5B
d. Step 5A
e. Step 5C
4. Make sure the Wheel (42) on the Left Pedal Assembly (51L) is NOT tilted too much to the LEFT or
RIGHT.
5. Repeat 1-2 above for the right side of the machine and tighten the hardware as follows:
a.
b. Step 3
c. Step 4A
d. Step 6B
e. Step 6A
f. Step 6C
6. Make sure the Wheel (42) on the Right Pedal Assembly (51R) is NOT tilted too much to the LEFT
or RIGHT.
7. Take the packet of Silicon Oil included and evenly distribute it along both of the
Aluminum Track
Rails (3).
8. Turn the flywheel a few times to check for smooth and quiet operation of the elliptical.
9. Go through and double check the Hardware of steps 4, 5, and 6 are thoroughly tightened.