Multimedia Mixer Amplifier Operating Manual
6
SDR-5116M
receiver module
1.
Channel indicator
2.
Diversity A/B indicator
3.
Audio signal indicator
4.
Channel Selector
5.
Squelch control
6.
Power switch/volume control
First turn on the Power of the main unit. Then turn on the individual power of the receiver
module. Select a channel that corresponds to the transmitter. When transmitter is turned on,
either A or B diversity indicator will flash to indicate that signal has been received.
SQUELCH (SQ) setting
When a channel is in use and interference signal is received, turn the SQ in clockwise
direction to make the receiver less sensitive and thus less susceptible to interference. If this
still does not solve the problem, it means this frequency is not applicable at current position.
Please switch over to the next channel.
DP-500M
MP3 module
1.
LCD display
2.
Press to return to previous track, press and hold to fast reverse.
3.
Press to play/pause
4.
Press to go to next track, press and hold to fast forward.
5.
Press to return to previous folder.
6.
Press to change play modes, press and hold to switch repeat modes.
7.
Press to go to next folder.
8.
IR sensor area
9.
USB input
10.
USB/SD indicator: The LED flashes during play and extinguishes when stop.
11.
SD card input
12.
Power switch/volume control
To use the USB/SD digital player, simply plug your USB/SD card into the port after the player
is turned on. To prevent any possible damage to the USB/SD card, always detach it after the
player has been shut off.
▲
remote control
