12
[
键入文档的引述或关注点的摘要。您可将
文本框放置在文档中的任何位置。请使用
enter into F-1
、
F-2
、
F-3
、
F-4
、
F-5 (F-1 sex, F-2 age, F-3 height, F-4, weight, F-5 body fat test), press
“
SPEED+
”
、
“
SPEED-
”
to change the date of F1-4 and after that press MODE to enter into F-5 body fat and
meanwhile hold the handle pulse for 2-3 sec, it will display your body fat. Body fat is suitable both for male and
female. Perfect body fat data is between 20 and 25. If below 19 it means you are too thin. If the body fat data is
between 25-29 that it means you are a little fat. If above 30 that means you are too fat. ( the data is just for
reference not suitable for medical use.)
F-1
Sex
01 male
02 female
F-2
Age
10------99
F-3
Height
100----200
F-4
Weight
20-----150
F-5
Body fat data
≤
19
A little thin
Body fat data
=(20---25)
Normal
Body fat data
=(26---29)
A little fat
Body fat data
≥
30
Too fat
10. Energy Saving Mode:
This system is of energy saving function. It will enter into energy saving mode after 10 minutes without any
signals. Press any key can awake it.
11.
MP3 Function (optional):
Switch on and connect the MP3 and now the machine is of loud speaker function. Please pay attention to the
voice volume in order not to damage the speaker equipment.
12. Safety Key Function:
Pull out the safety key to make the machine emergency stop at any time and meanwhile each window will
show
“
---
”
and the beeper will have a sound alarm. You cannot do any operation at this time. Put the safety key
in correct position and then the machine will go to standby mode immediately.
13. Switch off:
You can shut off the machine by switch off the power any time. And this won`t do any damage to the machine.
14. Attention:
1) Please check the power and the safety key is well or not.
2) If any accident happened during exercising, please pull out the safety immediately until it stop.
3) If there is something wrong with the machine, please connect the retailer as soon as possible. It`s not
allowed to repair the equipment by non-special person.
15. Simple Malfunction and Solution:
1) Switched on but without any signal on the display.
A. Check the overload protection is work or not, if so, press it down.
