FitLogic MIRACLE R280, Руководство пользователя

Страница: 13 / 84

12
press the speed button and incline button to set the target count-down
data, after that, press the START button to start the treadmill.
3. “START” button: When the power is on and the safety key is
attached onto the console, press this button at any time, it can start
the treadmill.
4
、
“STOP” button: While running the treadmill, press this button at any
time to stop the treadmill and return all the data back to 0.
5
、
“SPEED+”
、
“SPEED-” Button
：
After starting the treadmill, press
“SPEED” button to adjust the speed and the adjustment range of speed
is 0.1km each time. When pressing “SPEED” button for more than 0.5
seconds, the speed will be continuously increased or decreased.
6. “INC+”, “INC-” Button: After starting the treadmill, pressing
“INCLINE” button can adjust the level of incline and the adjustment
range of speed is 1 section each time. When pressing “INCLINE” button
for more than 0.5 seconds, the incline level will be continuously
increased or decreased.
7. “SPEED
：
2, 3, 5, 6, 8, 9, 10, 11” quick access button
：
you can do
quick setting of the speed.
8. “INCLINE
：
1, 3, 5, 7, 9, 11, 13, 15” quick access button: you can do
quick setting of incline.
9. When the treadmill is under standby state, press both SPEED+ and
for about 3 seconds. You will hear the buzzer make a sound
“BI”, then the changes between Kilometer and Mile will be finished.
START-UP QUICKLY (MANUAL)
1. Put the power switch on, and then attach the safety key to the
computer.
2. Press START/STOP button
，
the system will enter into 3 seconds
count-down, the buzzer will make the sound “Bi” and the TIME window
will start to count down, then the speed will run 1.0km/hour after 3