FITFIU FITNESS 1100036, Инструкция по эксплуатации

Страница: 58 / 80

58
MAINTENANCE
BELT LUBRICATION
Lubricating the treadmill helps to maintain performance and prolongs
the life of the equipment.
Depending on the number of hours of use per week, you will need to
lubricate it more or less regularly.
To apply lubricant:
1. Lift the belt on one side and apply lubricant to the running
surface. Use a rag to wipe the lubricant all over the runner. Repeat this process for the other side.
2. Check that the moving parts rotate freely and quietly.
Lubrication table:
NOTE:
You should lubricate your treadmill before the first use. Do not over-lubricate. Wipe excess
lubricant from the treadmill. Use only silicone oil.
BELT ALIGNMENT
To improve the usability of the belt, it can be adjusted if a deviation in direction is noticed after continuous use. To
do this adjust the bolts at the back of the base with the Allen key provided. To check if the treadmill moves, run the
machine at a speed of 6-8 km/h
NOTE:
The belt should not be too tight as this can cause noise and possible damage to the motor.
USE/WEEK TEMPORALITY
Less than 3h Every 6 months
From 3h to 5h Every 3 months
More than 5h Every 2 months
If the treadmill moves to the right, turn the right side adjustment bolt ¼ turn
clockwise, then turn the left side adjustment bolt ¼ turn counterclockwise. If
the belt does not move, repeat this step until it is centred.
If the strap moves to the left, turn the left side adjustment bolts ¼ turn
clockwise, then turn the right adjustment bolt ¼ turn counterclockwise. If the
belt does not move, repeat this step until it is centred.