background image

3

SAFETY INFORMATION

Be sure to read the entire instruction manual before you assemble or use this

equipment. Particularly, note the following safety precautions.

•  Exercising. Do not wear loose clothing that could get caught in the equipment. Appropriate 

footwear is also required when using the equipment.

•  Use the equipment only for intended use, as described in this instruction manual. Do not use 

attachments that is not recommended by the manufacturer.

•  Disabled people should not use the equipment without a qualified instructor or doctor 

present.

•  Never operate or use the equipment if it is damaged or not functioning properly.

•  Examine the equipment frequently especially the easily damaged parts. The safety 

level of the equipment can only remain if it is examined regularly. Replace any damaged 

components immediately. Do not use the equipment until it has been fully repaired.

•  Parents and others responsible for children must be aware that playing on the equipment 

could be dangerous and could lead to injuries. Children must not be left unattended with the 

exercise equipment.

•  A spotter is recommended whilst doing exercise, therefore to prevent any injuries.

•  This product is suitable for a maximum user weight of 100kg.

•  Your product is intended for use in clean and dry conditions. You should avoid storage in 

cold and damp places as this could lead to corrosion and other similar problems that are 

outside of our control.

IMPORTANT SAFETY INFORMATION

Содержание TF-7005A





























Отзывы: