Fit4Home F4H-ES-LME350TS-RD, Руководство пользователя

Страница: 14 / 23

14
OPERATING THE MONITOR
OPERATING THE MONITOR
1. ON/OFF
Press the switch for 1 sec, and the display will light indicating the power is on.
Press for 3 seconds if you want to turn it off. It will turn off if you don’t use it for 3 minutes.
2. SPEED CONTROL
Press the right thumb accelerator to control the speed (1-25km/h). There are three speed level
and press the speed level button to change.
3. BREAKING CONTROL
Press the left thumb and the electronic magnetic brake will operate. The greater angle you press,
the greater breaking force will be.
4. HORN
Turn on the power, when pressing the horn button, it will hoot.
5. LED HEADLIGHT
In manual mode: Press the Light button when needed and there will be a sign in display indicates
the light is turn on. Press the button again when you do not need the light.
6. MILEAGE SHOW
When power off, it shows time. When the display is powered on, it displays three modes: total,
trip and time. You can change it by pressing the settings button. In ‘trip’ mode, press the setting
button (S) for 3 seconds and it will clear the trip.
7. EMERGENCY
In an emergency, it’s recommended to use the foot brake. Electronic magnetic brake and rear
wheel friction brake; under normal circumstances, please do not use the emergency brake
at high speed to avoid the wheel damage and the company shall not be responsible for this
damage.
DISPLAY FACTORY SETTING
There are 5 buttons. They are Horn button (K5), Setting button (K4), Switch button (K3), Light
button (K2), Speed level (K1).
Press the K5 and K4 for 3sec to enter parameter table.
K5 button: Short according to return to the running state,the modification is not effective.
K4 button: Short press to the next parameter; Grow by more than 2 seconds, save the changes
made, and return the running state.
K3 button: Not effective
K2 button: Short press, reverse adjust parameter.
K1 button: Short press, adjust parameter.