FiT SUPER SESI, Руководство пользователя

Страница: 33 / 36

Page 31 of 34
SUPER SESI, by FIT User manual, Revision 2.0
Charging the Nano-amperemeter
CAUTION During this operation, the electrospray voltage must be set to zero.
The Nano-amperemeter is powered by internal rechargeable batteries. To ensure proper
insulation, these batteries are encapsulated and cannot be replaced. When the batteries run
out of charge, you will need to recharge them.
Disconnect the Nano-amperemeter from the SUPER SESI by pulling it gently, and connect the
nano-amperemeter to its charger until charge is completed once the LED Status changes from
red to green light. Once the Nano-amperemeter is charged, return to its original position.
Figure 27. Removing the ampere-meter from the SUPER SESI
Figure 28. Connecting the nano-amperemeter to the charging unit