INSTRUCTION MANUAL
FIT DISPLAY C FIT REMOTE BASIC
Error code
Displayed error message
Action/limitation
18-0A
Charger Start Error
1. Re-start the system.
2. Switch off system.
3. Disconnect charger from system and socket.
4. Wait until the status LED goes out.
5. Check plug contacts on the e-bike and charger
and clean if necessary.
6. Plug charger into the socket again.
7. Plug charger into the system again and start
system up.
8. Contact your specialist dealer if the problem
persists.
18-0B
Lock Start Error
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
19-xx
Remote Safety Error
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
1A-xx
Tampering detected
1. Check that the magnet and speed sensor are
correctly positioned.
2. Re-start the system
3. Contact your specialist dealer if the problem
persists.
1B-xx
System Voltage Error
1. Check that the correct battery has been inserted
(36V/ 48V).
2. Re-start the system.
3. Contact your specialist dealer if the problem
persists.
1C-xx
Bluetooth Module Error
1. Re-start the system.
2. Re-start FIT E-Bike Control (app); update if
necessary.
3. Contact your specialist dealer if the problem
persists.
1D-xx
EMS mode active
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
1E-xx
OEM mode active
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
1F-xx
TEST mode active
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
20-xx
Reserve mode active (info text)
1. Charge battery.
2. Contact your specialist dealer if the problem
persists.
21-xx
Lock Error
1. Restart system.
2. Contact your specialist dealer if the problem
persists.
22-xx
Full load cycle active (info text)
Info: battery is charged 100% for the purposes of
calibration despite LONG LIFE mode.
23-xx
Pressure Sensor Error
Sensor may need to be replaced. Contact your
specialist dealer.
FIT_Manual_Display_Comfort_Remote_Basic_V1_en | Version 01 | 04.04.2022
31
