Assembly the handle bar.
Put the handle bar(F) into the handle bar housing of central tube(D) and secure it by spring
washer, washer(N6,N7) and bolt(N4)trough the clip(M) and secure it by spring washer,
washer(N6,N7) and sleeve(N5). Then position the E type knob(L) into sleeve(N5) by turning
tigtly.
Assembly for the hand pulse sensor and adjusting the handle bar.
Slide the sensor wires(A6) through the computer holde as shown on vieuw A. Then, fix the
sensor bt rubber cap(A8) to avoid movement. Loose the E type knob(L) to the left direction
then you can adjust different position what you need. Attention: Please make sure the knob(L)
is turning tightly to avoid user falling down.
F
D
M
N7
N6
N5
N4
L
A6
A7
A6
A8
A8
L
Handleiding Hometrainer Fit Bike Ride 2
