MAN-00112 R 2.0 - EasyGrid Base User Guide
13
4.6 Optical Connectors
The EasyGrid Base -
A
- is compatible with all FISO TPT-62_-
R1
-_ sensors.
No calibration factor or calibration procedure is required to get accurate
temperature measurements.
There can be up to 12 optical channels on each EasyGrid Base. Each channel is designed to be connected with
a fibre Optic extension, an EasyThrough and a Fiber Optic sensor.
CAUTION
Use care in handling fiber optic connectors. Always clean the fiber tip prior to insertion into
the connector for optimum performance. For details on connector handling and maintenance,
please refer to
Appendix A: Cleaning fiber optic connectors
To connect a ST connector, follow these 5 steps:
1.
Remove the protective cap from the Male ST Connector and ST Mating
2.
Use the EasyClean tool to clean the Male ST connector and the ST Mating
3.
Align the male connector key with the mating slot
4.
Insert the connector in the mating
5.
Twist to lock
