FISNAR VPP50 Скачать руководство пользователя страница 15

 

 

 

 

LIMITED WARRANTY

 

 
Manufacturer warrants this product to the original purchaser for a period of one (1) year from the 
date of purchase to be free from defects in material and workmanship, but not against damages 
caused by misuse, negligence, accident, faulty installation, abrasion, corrosion or by not 
operating in accordance with factory recommendations and instructions. Manufacturer will repair 
or replace (at factory's option), free of charge, any component of the equipment thus found to be 
defective, upon prepaid return of the equipment to the factory during the warranty period of the 
equipment. In no event shall any liability or obligation of Manufacturer arising from this warranty 
exceed the purchase price of the equipment. 

This warranty is valid only when 5 micron 

filtered air is used.

 The manufacturer's written liability, as stated herein, cannot be altered or 

enlarged except by a written statement signed by an officer of the company. In no event shall 
manufacturer be liable for consequential or incidental damages. A return authorization is required 
prior to shipping a defective machine to the factory. 
 

Manufacturer reserves the right to make engineering or product modifications without notice. 

 

 

 

 
 
 
 
 

 

 

 
 
 
 

 

 

 

[email protected]

 

www.fisnar.com 

Содержание VPP50
















Отзывы: