VPP50 Vacuum Pickup System Operating Manual
© 2020 Fisnar
- 11 -
VPP50 Rev 01
VACUUM PICKUP PEN SETUP
FIG. 5: Vacuum Cup Attachment
1.
Select the correct size vacuum cup based on the size and weight of the component to be
picked up.
2.
Select the correct size pickup tip, by choosing one which has a larger outside diameter,
than the internal hole on the stem of the chosen vacuum cup.
3.
Gently push the stem of the vacuum cup onto the pickup tip. See FIG. 5.
Ensure that the pickup tip does not protrude into the “cup” area of the vacuum cup, as
this may result in damaging the component that is to be picked up.
A successful setup will be confirmed by a tight fit that does not deform the surface of the
vacuum cup.
4.
Insert the pickup tip assembly into the pickup pen, until pickup tip hub is fully secured. If
using a 45
°
pickup tip, rotate the tip to achieve the correct pickup angle position.
5.
Store the pickup pen into the supplied holder, to prevent the vacuum cup from being
damaged when not in use.
