14
Fishman Corporation
USA Toll Free 1-800-433-2115
6.2
Remove the seal from the
Genius
®
barrel reservoir
pre-filled with your assembly
fluid.
6.3
Holding the dispensing gun
with the piston hub pointed
upward, place the barrel
reservoir over the piston hub
of the dispensing gun.
6.4
Holding both barrel reservoir
and dispense gun loosely,
step on the foot pedal until
the barrel reservoir ears are
raised at least 1/4” (6.35 mm)
above the plate.
6.5
Manually twist the barrel
reservoir in a clockwise
direction until the luer lock
connector is finger tight
and the ears of the barrel
reservoir are flush against
the retaining plate.
1/4”
