Fisheye FIX AQUAVOLT 10000, Руководство по эксплуатации продукта

Страница: 20 / 28

- 20 -
-Do not work with wet hands or under wet conditions due to the risk of
electric shock or damage.
-Make sure that there is no dust, sand etc. on the O-ring, O-ring groove or O-ring
contact surface and grease the O-ring before closing the rear body.
-Take care not to drop when removing the battery. It may cause not only damage to the
battery but also injury.
-Attach the both protection caps to prevent any
short-circuit while keeping the battery.
1. Hold the front body firmly and take off the rear bodey by roatating anti-clockwise.
2. Take of both protection caps of the battery.
3. Tilt front body and load the battery.
4. Hold the front body firmly and attach the rear body by roatating clockwise.
* The disassembly of the battery is a reverse procedure.
Battery Loading Procedure
WARNING
CAUTION
Loosen Tighten