www.eu.fishersci.com/fisherbrand
44
4.2 Replacing AccuDuo H Pack and AccuDuo U Pack
a) Remove the final filter
b) At the Dispenser Ready mode, press
to release pressure inside the
system, wait until water from the dispenser stops, then press
to stop
c) Press the "Start" Button on the system panel to let system into Standby
mode. Power-off the system. Remove the right side system panel.
d) Install the AccuDuo H Pack and U Pack as the procedures described in
2.4.3.
e) Power-on the system; press the Start button to initiate system. Flush and
register the AccuDuo U Pack cartridge on the dispenser as described in
3.3.3.
f) Install the right side system panel.
g) Install the final filter.
4.3 Replacing Final Filter
a) Remove the final filter
b) Install and register final filter as described in 3.3.4.
If a final ultrafiltration filter for pyrogen replace is needed, please install the
device the same way as the final filter.
Pressure Relief
