Fisher SRT-7072 Скачать руководство пользователя

Страница: 31 / 44

TAPE COUNTER

Using the counter, it is easy to find a desired recording.

Press the COUNTER RESET button, at the beginning
of the desired recording.

The counter will be reset to “0

”.

Press the COUNTER MEMORY button.

“

[

”

is displayed on the digital display.

To cancel the counter memory function, press
the

COUNTER MEMORY

button a second time.

After recording or playback, turn the SHUTTLE ring
counterclockwise from stop mode.

The tape is rewound to the counter “0

”

reading.

If you rewind the tape past the “0

”

position, turn the

SHUTTLE

ring clockwise.

NOTES:

There is no tape counter indication for the blank
portions of the tape.

In the 8-hour recording speed mode only, the tape
counter indicates real hours, minutes and seconds.

In the other recording speed modes, the tape counter
indication is a ratio of the 8-hour mode base indication.
(In 64-hour recording mode, each “second” of the tape
counter actually represents approximately 72/8 = 9 real
seconds.)

There may be a slight discrepancy between the
position shown on the tape counter and the actual tape
position.

When rewinding the tape past the “0

”

position, a minus (–) sign will be displayed.

SETTING THE SECURITY LOCK

The security lock function is designed to prevent
accidental stopping of recording if the STOP button is
pressed inadvertently.

While holding the SHIFT

button, press the

REC/PLAY SPEED

button.

“

”

is displayed on the digital display.

To cancel the security lock, while holding the SHIFT

button, press the REC/PLAY SPEED

button, “

”

will be erased from the digital display.

NOTES:

While the security lock is engaged all commands,
except the one to cancel the security lock, are disabled.

The security lock cannot be engaged while a menu is
displayed.

RC4QR/U3 (SRT-7072 GB) Tue. June, 29/1999

English

Содержание SRT-7072












































Результаты поиска

Содержание SRT-7072

Отзывы:

Похожие инструкции для SRT-7072

Бренды по названию

Популярные бренды

Fisher SRT-7072, Инструкция по эксплуатации

Результаты поиска

Содержание SRT-7072

Отзывы:

Похожие инструкции для SRT-7072

Бренды по названию

Популярные бренды