background image

Lit. No. 13648/9511, Rev. 07

1

August 10, 2005

SAFETY INFORMATION

NOTE: Identifies tips, helpful hints and
maintenance information the owner/operator
should know.

 WARNING

Indicates a potentially hazardous situation
that, if not avoided, could result in death or
serious personal injury.

 CAUTION

Indicates a situation that, if not avoided, could
result in damage to product or property.

 WARNING

• Driver to keep bystanders minimum of 25

feet away from operating spreader.

• Before working with the spreader, secure

all loose-fitting clothing and unrestrained
hair.

• Before operating the spreader, verify all

safety guards are in place.

• Before servicing the spreader, wait for

conveyor or spinner to stop, then lock out
power.

• Do not climb into or ride on spreader.

 WARNING

Overloading could result in an accident or
damage.  Do not exceed GVWR or GAWR
ratings as found on the driver-side vehicle
door cornerpost.  See Loading Section to
determine maximum volumes of spreading
material.

 WARNING

Do not install the control for this product in the
deployment path of an air bag. Refer to vehicle
manufacturer’s manual for air bag deployment
area(s).

PREFACE

This manual has been prepared to acquaint you with
the safety information, operation and maintenance of
your new tailgate spreader.  Please read this manual
carefully and follow all recommendations.  This will
help ensure profitable and trouble-free operation of
your spreader.  Keep this manual accessible.  It is a
handy reference in case minor service is required.

When service is necessary, bring your spreader to
your local outlet.  They know your spreader best and
are interested in your complete satisfaction.

NOTE: This spreader is designed to spread snow
and ice control materials only.  Do not use it for
purposes other than those specified in this
manual.

Before You Begin

• Park the vehicle on a level surface, place shift

lever in PARK or NEUTRAL and set the parking
brake.

Содержание Speed-Caster

























Отзывы: