Fisher FSL-1100B-H-3F Скачать руководство пользователя страница 23

Страница: 23 / 48

②

Indoor ambient temperature is that at the place of displayer (02 is displayed at timer displayed

location)

③

Return air inlet temperature sensor shall be selected for cooling, dry and fan modes and wired

controller temperature sensor (03 is displayed at timer displayed location) shall be selected for

heating and auto modes.

In debugging mode, press

Mode

button to adjust the temperature displayed location displaying 01

and press

▲

▼

button to adjust setting state at timer displayed location. There are 2 types for

selection:

①、

3 low grades ( LCD displays 01)

②、

3 high grades ( LCD displays 02)

Three low grades indicate high, medium and low grades and 3 high grades indicate super-high,

high and medium grades.

Press

Enter/Cancel

button to save the setting and quit after setting. If there is not any operation

within 20s after the system responds the latest button operation in this interface, the system will quit this

menu and display normal off state; meanwhile, current setting won’t be saved.

Upon startup of the unit without malfunction or under off state of the unit, press

▲

and

▼

buttons at

the same time for 5s till the wired controller enters lock state. In this case, LCD displays

. After that,

repress these two buttons at the same time for 5s to quit lock state.

Under lock state, any other buttons won’t give any response to the press.

Memory switchover: Under off state of the unit, press

Mode

and

▲

buttons at the same time for 5s

to switch memory modes. During setting memory mode,

Memory

will be displayed. If this function is not

set, the unit will be under off state after power failure and then power recovery.

Memory recovery: If memory mode has been set for wired controller, the wired controller after

power failure will resume its original running state upon power recovery.

Note:

1. It will take about 5s to save all the information. Please don’t cut down the power

after content changed in 5 second, or It may be fail to save the content.

If there is gate control system, the unit can run after plugging in card and stop after pulling out the

5.14.2

Three Grades of Speed for Indoor Fan

5.15

Other Functions

5.15.1

Lock Function

5.15.2

Memory Function

5.15.3

Gate-control Display Function

Содержание FSL-1100B-H-3F

















































Результаты поиска

Содержание FSL-1100B-H-3F

Отзывы:

Бренды по названию

Популярные бренды

Fisher FSL-1100B-H-3F, Руководство по эксплуатации

Результаты поиска

Содержание FSL-1100B-H-3F

Отзывы:

Бренды по названию

Популярные бренды