Fisher Scientific Fisherbrand accumet AB330, Руководство пользователя

Страница: 9 / 36

accumet AB330 Conductivity Meter 9
2.4 Display Overview
Icon Description
Main Measurement Field:
Displays conductivity, salinity
or TDS readings in Measure
mode.
2nd Measurement Field:
Displays nominal cell constant
in Measure mode.
3rd Measurement Field:
Displays temperature value as
°C or °F in Measure mode.
4th Measurement Field:
Displays linear temperature
compensation coefficient
value in Measure mode.
Press   to scroll Icon: On-
screen text prompt shown
when keys can be used to
scroll through a list; for
example, scroll through list of
Setup Menu options.
Press
 
to change Icon:
On-screen text prompt shown
when keys can be used to
change a value; for example,
to change the temperature
value in the Setup Menu.
Press CAL to save & end
Icon: On-screen text prompt
shown when in calibration
mode and calibration can be
saved and ended, when one
to four points are complete.
Press Enter to accept Icon:
On-screen text prompt shown
when changes must be saved
by pressing the “Enter” key on
the keypad.
Icon Description
Calibration Icon: Indicates meter is in
the calibration mode; also shown with
the Setup Menu Icon and Memory Icon
when viewing the calibration log.
Setup Menu Icon: Indicates meter is in
the Setup Menu mode.
Measure Icon: Indicates meter is in the
Measure mode.
Memory Icon: Indicates meter is in the
Setup Menu and viewing the data log or
calibration log.
Log Saved Icon: Indicates meter is
actively saving data to the data log or
calibration log.
Continuous Icon: Indicates the current
meter read type is Continuous and
measurement values are continuously
updated on the display.
Stopwatch Icon: Indicates meter
measurement stability criteria for current
measurement is stabilizing/not ready
and meter is actively reading.
Checkmark Icon: Indicates meter
measurement stability criterial for current
measurement is stable/ready and meter
has determined the measurement is
complete.
Timed Icon: Indicates the current meter
read type is Timed, measurement values
are continuously updated on the display
and logged/exported according to the
selected time intervals.
Auto-Read Icon: Indicates the current
meter read type is Auto-Read,
measurement value is updated on the
display until stable and then
measurement is logged/exported and
locked on display until the “Read” key is
pressed again.
Hold Icon: Indicates meter is in
Continuous read type, the “Hold” key
has been pressed and the measurement
is locked on the display until the “Hold”
key is pressed again.
MAN Icon: Indicates no temperature
probe is connected to the meter, use
the Setup Menu to enter the sample
temperature.
ATC Icon: Indicates a temperature
probe is connected to the meter and
actively sending temperature readings.