15
6 USER CONTROLS
Figure 12
MODE Control
The Mode selection switch has 6 positions:
•
Off
•
Batt/Freq
– Used for battery check and frequency adjustment to minimize
electrical interference. This position is not used for searching.
•
All Metal
– All targets induce a high tone.
•
Tone
– Low conductors induce a high tone – iron and high conductors
induce a low tone – the setting of the
Reject
control determines the
“crossover point” for the two tones.
•
Mute
– Low conductors induce a high tone – iron and high conductors are
muted – again, the
Reject
control setting determines the “crossover point” for
the muting.
•
Volcanic Sand
– A specialized mode with the ability to operate in the most
extreme magnetic black sand (with reduced sensitivity).
Battery Check/Frequency
Battery Check
The battery life of the fully-charged 2200mAh battery pack will be approximately 3.5
hours. In
All Metal
mode battery life will depend on the mode and the number of
targets detected.
