3
Assembly
• Fit the tabs on the large support into
the slots in the arch. Push to
"snap"
into place.
• Hook the toys to the loops on the arch.
• Fit the ends of the small supports into
the slots in the arch.
Hint:
The small supports are designed to
fit into the arch one way. If they do not
seem to fit, turn the arch around and
try again.
3
5
7
6
• Place the mat, decorated side up, between
the bases and large support.
• Fit the straps on the mat through the slots
in the support/bases. Make sure the tab on
the end of each strap forms a "T" on the
other side of each slot.
• Pull up on the mat to be sure all three
straps are secured.
4
• Lay the assembly face down. Insert two
screws into the arch and tighten.
Arch
Mat
M
M
M
M
M
M
M
M
M
Large
Support
Straps
S
Screws
