• At an angle, insert the tabs on the seat into any of the top
three sets of slots for the lower, middle or upper position.
• Lower the seat so that the seat retainer inserts and snaps
into the slots in the frame.
• Pull up on the seat to be sure it is secure.
Hint:
The seat can be attached to the frame in any of
three positions, depending on the size of your child. Check
your child’s fit on the trike by observing the seat to pedal
distance, as it is being ridden. If the pedals seem too far
away or too close for your child, move the seat up or down.
• Make sure the areas where the labels will be applied are
clean and dry. Wipe your vehicle with a clean, soft, dry
cloth to remove any dust or oils.
• For best results, avoid applying a label more than once.
• Apply the labels as shown in the illustration above.
• After applying the label, rub the label firmly with a cloth to
make sure the label is adhered to your vehicle.
Lower Position
Middle Position
Upper Position
Tabs
Slots
Seat
Retainer
Label Decoration
Attaching the Seat
6
SIDe VIeW
DASh VIeW
6
9
3
11
16
17
1
4
13
14
10
12
8
5
(Label 1's both sides)
(Label 10's
both sides)
(Label 13's both sides)
(Label 2
opposite side)
(Label 7
opposite side)
(Label 15
opposite side)
