4
FRONT VIEW
• Position the frame so that the wider end is down.
• Slide the ends of the frame into the sockets on the base. Push to
“
snap
” in place. Pull up on the frame to be sure it’s secure in
the base.
Hint:
The frame is designed to assemble to the base one way.
If you can remove the frame from the base, turn it around and
try again!
• Place the base on a flat surface.
Hint:
You may need to rotate the base sockets so they are
upright, as shown.
• Carefully turn the seat bottom over.
• Insert four #8-16 x 1,9 cm screws into the seat bottom and tighten.
Assembly
2
1
4
Base
Base
Frame
• Fit an armrest onto the seat bottom.
Hint:
The armrests are designed to fit to the seat bottom one
way. If it does not seem to fit, try the other armrest.
• Repeat this procedure to assemble the other armrest.
3
Armrest
Seat Bottom
#8-16 x 1,9 cm Screws
BACK VIEW
• Fit the seat bottom assembly onto the frame.
• Slide the seat bottom assembly down until you hear a "
click
".
5
