4
5
Seat Back Tube
Retainer Socket Up
• Make sure the socket in the retainer is
upright
.
• Fit the seat back tube onto the ends of the base wire.
• Push the seat back tube to be sure it is completely on the base wires.
Assembly
6
• Insert an M5 x 20 mm screw in each hole in the seat back tube,
base wire and into the inside of the retainer. Tighten the screw.
• Pull the seat back tube up to be sure it is secure.
3
• Insert an M5 x 20 mm screw through each foot and tighten.
4
• Position the footrest so that the soothing unit is upright.
• Fit the footrest onto the ends of the base wires.
Base Wires
Footrest
