5
5
Assembly
Assembly
Sounds and
Lights Box
• Turn the frame on its side.
• Fit the sounds and lights box onto the dash on the topside of
the vehicle.
• Then, fit the retainer over the battery compartment door on the
underside of the frame. Insert four #8 x
3
/
4
” screws into the retainer
and tighten.
• Turn the frame upright.
Sounds
Lights
1
Retainer
Frame
• Slide a
3
/
16
16
”
washer onto the front axle
labeled 2
.
• Then, slide a front bushing,
flat side first
, onto the front axle.
2
3
/
16
16
”
Washer
Front
Bushing
Front Axle
BOTTOM VIEW
2
• Fit a cap nut onto the end of the front axle.
• Tap the cap nut with a hammer.
Gently pull the wheel to make
sure the cap nut is securely attached to the front axle.
• Fit a wheel cover onto the hubcap, and push to
“snap”
in place.
4
Cap Nut
Wheel
Cover
• Slide a wheel,
smooth side first
, onto the front axle.
• Then, slide a hubcap,
post side first
, onto the front axle and into
the wheel.
3
Wheel
Hubcap
Front Axle
