Stand on Target for Balance
• Place Switch Board
™
on its side with the handle facing up.
• Squeeze the sides of the handle latch and pull it out completely. While
holding the handle latch out with one hand, pull the handle down slightly
(about two inches) with the other hand. Release the handle latch .
• Continue to rotate the handle completely down.
• Push the handle latch until the tabs “snap” into place and . Make
sure you hear a “snap”.
• Position Switch Board
™
upright. Pull the handle up to be sure it is secure.
Hint: Make sure your rider stands on the middle of the target for balance!
Handle
Handle Latch
5
Skateboard
Handle Down
Note: Protective equipment in
this illustration is not included
with this toy.
Handle Down
1
1
2
3
Tabs
Handle Latch
Handle Latch
2
3
PUSH