• Place Switch Board
™
on its side with the handle facing up.
• Squeeze the sides of the handle latch and pull it out completely. While
holding the handle latch out with one hand, pull the handle outward slightly
(about two inches) with the other hand. Release the handle latch .
• Continue to rotate the handle to the upright position.
• Push the handle latch until the tabs “snap” into place and . Make
sure you hear a “snap”.
• Position Switch Board
™
upright. Push the handle back to be sure it
is secure.
Hint: Make sure your rider stands on the middle of the target for balance!
Scooter
Note: Protective equipment in
this illustration is not included
with this toy.
Handle Up
Handle
Handle Latch
Stand on Target for Balance
4
Tabs
Handle Latch
Handle Latch
Handle Up
1
2
3
1
2
3
PUSH