• At an angle, fit the reflector
over the new light bulb.
• Align the notch in the reflector
with the tab in the light bulb
receptacle.
• Push the reflector lens slightly
and fit the reflector edges into
the grooves in the light bulb
compartment cover.
17
Notch
Tab
Groove
• Replace the retainer. Insert the
two screws in the retainer.
• Tighten with a Phillips screw-
driver. Do not over-tighten.
• Fit the tabs on the light bulb
compartment door into the
slot in the back of the trans-
mitter. Lower the light bulb
compartment door closed.
• Tighten the screw in the light
bulb compartment door with
a Phillips screwdriver. Do not
over-tighten.
Tab
Slot
Light Bulb
Compartment
Door
4
6
5
7