One Time Assembly
Back Panel
Label Decoration
• Align the two tabs on the bottom
of the scale with the slots in the mid-
dle, back edge of the base.
• Insert and snap the tabs on the
scale into the slots in the base.
Gently pull up on the scale to be
sure it is secure.
• Align the three tabs on the bottom of
the back panel with the three slots
just above the buttons.
• Insert and snap the tabs on the back
panel into the slots in the base.
Gently pull up on the back panel to
be sure it is secure.
One-time assembly is now complete.
• Make sure the areas where the
labels will be applied are clean
and dry.
• Apply the labels as indicated in
the illustration.
• For best results, avoid applying
the labels more than once.
Scale
Base
2
1
5
3
4
4
73347a-0920.qrk 12/4/01 2:51 PM Page 4
