• Turn the assembly around so the opposite side faces you.
• Position the panel so that the tubes bend down. Locate the single
and double dots on the panel tubes.
• Fit the panel tubes into grooves in the base tube feet.
Hint:
Match the single and double dots on the panel tubes with the
single and double dots on the base tube feet.
5
ASSEMBLY
Foot
Single Dots
Double Dots
(Not showing
from this
view.)
Panel
4
• Fit a lock nut into the hexagonal opening in the base tube foot.
Make sure the protruding side is facing outward.
• Then, insert a bolt through the hole in the opposite side of the base
tube foot and into the motorized panel tube. Tighten the bolt with
a Phillips screwdriver.
IMPORTANT!
Do not over-tighten this bolt. If the bolt is over-
tightened, the tube will not pivot open and closed.
4
Bolt
Foot
Lock Nut
• Fit a lock nut into the hexagonal opening in the base tube foot.
Make sure the protruding side is facing outward.
• Then, insert a bolt through the hole in the base tube foot and into
the panel tube. Tighten the screw with a Phillips screwdriver.
IMPORTANT!
Do not over-tighten this bolt. If the bolt is over-
tightened, the tube will not pivot open and closed.
6
Bolt
Foot
Lock Nut
• Fit a lock nut into the hexagonal opening in the base tube foot.
Make sure the protruding side is facing outward.
• Then, insert a bolt through the hole in the base tube foot and into
the panel tube. Tighten the bolt with a Phillips screwdriver.
IMPORTANT!
Do not over-tighten this bolt. If the bolt is over-
tightened, the tube will not pivot open and closed.
7
Screw
Foot
Lock Nut
Protruding
Side
Protruding
Side
Protruding
Side
Tube
Tube
Tube
