7
Assembly
13
Seat Back
Peg
Holes
At an angle, fit the pegs on each side of the seat back into the
•
holes in the sides of the seat bottom.
Hint:
You may need to flex the bottom edge of the seat back to fit
the seat back pegs into the holes in the seat bottom.
Lift the seat back latch and push the seat back forward.
•
14
Insert two M4 x 17mm screws into the seat back and tighten.
•
15
M4 x 17mm
Screws
M4 x 17mm
Screws
Seat Bracket
Fit a seat bracket to the side of the seat bottom, as shown.
•
Insert two M4 x 17 mm screws and tighten.
•
16
BACK VIEW