6
N9733pr-0920
BATTERY CHARGING
E
D
Battery
Connector
Charger
Connector
A
B
• Plug the charger connector into the battery connector
A
.
• Plug the charger into a standard wall outlet
B
.
Note:
Use the charger only in a wall outlet. Do not plug the
charger into a ceiling outlet. If power flow to the wall outlet is
controlled by a switch, make sure the switch is ON. The power
indicator on the charger does not indicate the charge status of
your battery. The power indicator allows you to see that there is
power from the wall outlet.
• Before first-time use, charge the battery for
at least 18 hours.
Never charge the battery longer than 30 hours.
• Recharge the battery for at least 14 hours after each use of
your vehicle. Do not charge the battery longer than 30 hours.
• Once the battery is charged, disconnect the battery connector
from the charger connector. Unplug the charger from the wall
outlet. The battery is now ready to be installed in your vehicle.
Please see the Battery Installation section on page 12 for
detailed instructions on installing your battery. If your battery
is already installed in your vehicle, simply re-connect the motor
harness connector to the battery.
WARNING
Children can be harmed by small parts,
sharp edges and sharp points in the
vehicle's unassembled state, or by electrical
items. Care should be taken in unpacking
and assembly of the vehicle. Children should
not handle parts, including the battery, or
help in assembly of the vehicle.
ASSEMBLY
• Insert four screws into the underside of the bumper and tighten.
Hints:
- You may need to turn the wheels to fit all four screws into
the bumper.
- You may need to push and pull on the bumper to align the
screw holes.
1
BOTTOM VIEW
2
• Carefully lift the front end of the vehicle.
• Fit the front bumper to the front of the vehicle.
Front Bumper
Power
Indicator
