3
Parts
IMPORTANT!
Please remove all parts from the package
and identify them before assembly. Some parts may be
packed inside the pad.
4 mm x 30 mm Screw – 2
4 mm x 20 mm Screw – 2
Shown Actual Size
Assembly
• Insert the ends of the front base into the handle holes on the
seat back tube.
Hint:
If you cannot insert the front base into the seat
back tube, turn the seat back tube over and try again!
• Insert two 4 mm x 20 mm screws through the hole in the
handles and the ends of the front base. Tighten the screws.
Hint:
If the screw does not easily insert through the hole
in the handle and front base, you may not have pushed the front
base completely into the handle. Push the front base into the
handle to align the holes and then insert the screw.
Turn Tube Ends Up
• Place the seat back tube face down, as shown.
• Turn the ends of the tube upright.
Seat Back Tube Handles
Seat Back Tube
Front Base
IMPORTANT!
Before assembly, inspect this product for
damaged hardware, loose joints, missing parts or sharp edges.
DO NOT use if any parts are missing or broken. Contact
Mattel for replacement parts and instructions if needed.
Never substitute parts.
1
2
Infant Support
Bunny
Seat Pad
Seat Back Tube
Soothing Unit
Base Tube
Front Base
Toy Bar
