background image

3

W6201pr-0920

IMPORTANT INFORMATION

Read this manual carefully for important safety 

• 

information and operating instructions before using 
your vehicle. Keep this manual for future reference, 
as it contains important information. 
The vehicle is designed for use on grass, asphalt, and 

• 

other hard surfaces; on generally level terrain; and by 
children 3 years of age and older. Do not exceed the 
maximum weight capacity of 130 lbs (59 kg).
Your new vehicle requires adult assembly. Please set 

• 

aside at least 45 minutes for assembly. 
Use this vehicle 

• 

ONLY

 outdoors. Most interior fl ooring 

can be damaged by riding this vehicle indoors. 
Fisher-Price

®

 will not be responsible for damage 

to the fl oor if the vehicle is used indoors.
You must charge your battery for 18-30 hours 

• 

before 

you use your vehicle for the fi rst time

. We recommend 

charging your battery before beginning assembly. Please 
see the Battery Charging section for detailed instructions. 
The battery charger is not a toy. 

• 

Do not short circuit the battery.

• 

Adults Note: 

• 

Regularly examine the charger for 

damage to the cord, plug, housing or other parts that 
may result in the risk of fi re, electric shock or injury. In 
the event of any damage, do not use the charger until 
the damage has been properly repaired. 
Your Power Wheels

• 

®

 12 volt battery is equipped 

with a built-in thermal fuse. The thermal fuse is 
a self-resetting safety device which automatically 
“trips” and shuts down operation of the vehicle if the 
vehicle is overloaded or the driving conditions too 
severe. Once a fuse has “tripped”, remove your foot 
from the pedal and wait approximately 25 seconds 
before operating the vehicle again. To avoid repeated 
automatic shut-downs, avoid severe driving conditions.

If a thermal fuse in a battery continually trips under 

• 

normal driving conditions, please contact your local 
Power Wheels

®

 Authorized Service Center.

To prevent damaging the motors and gears, teach your 

• 

child to stop the vehicle before switching direction.
If you have any questions about your Power Wheels

• 

®

 

vehicle, please call our toll-free service lines at 

1-800-348-0751

. Trained customer service 

representatives are available to take your call in English 
or French. Habla Español? Si usted tiene alguna 
pregunta ó necesita asistencia llame gratis 

1-800-348-0755 

para los Estados Unidos. Tenemos 

representantes que hablan español para atender 
su llamada.
For your convenience, Power Wheels

• 

®

 maintains an 

independently owned and operated 

Authorized Service 

Center Network with more

 

than 300 authorized service 

centers nationwide. Our authorized

 

service centers 

will repair or replace parts under warranty at no

 

extra 

charge, and can perform non-warranty repairs for 
a minimal

 

charge. To fi nd the authorized service 

center nearest you,

 

please visit us online at 

www.powerwheels.com 

or call 

1-800-348-0751

.

Please visit us online at 

• 

www.powerwheels.com

 to 

register your vehicle. 

Содержание Hot Wheels Dune Racer W6201





























Отзывы: