10
• Fit the curved end of the steering column into the hole in
the front axle.
Note:
You may need to straighten the vehicle tires and
rotate the steering column to fit it into the hole in the
front axle.
• Fit a cap nut onto the end of the steering column.
• While supporting the steering column, tap the cap nut
with a hammer to secure it on the steering column.
• Hold the steering column in place and gently lower the
vehicle body.
• Position the steering wheel so that the spokes form a
“Y” as shown.
• While supporting the steering column, fit the steering
wheel onto the steering column.
• Fit a cap nut onto the end of the steering column.
• Tap the cap nut with a hammer to secure it on the
steering column.
Assembly
Steering Column
Hole
Front Axle
Bottom View
5
Steering Wheel
Cap Nut
• Align the slot on the steering wheel cap with the tab in
the center of the steering wheel.
• Fit the steering wheel cap into the center of the
steering wheel.
• Insert two #8 x 1" screws into the steering wheel cap.
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
Steering
Wheel Cap
Steering
Column
Front Axle
Cap Nut
Bottom View
6
8
7
“UP”
