Battery Installation
2
1.5V x 3
“AA” (LR6)
Battery Safety Information
Batteries may leak fluids that can
cause a chemical burn injury or ruin
your toy. To avoid battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or recharge-
able (nickel-cadmium).
• Insert batteries as indicated on the
battery compartment door.
• Remove batteries during long periods
of non-use. Always remove exhaust-
ed batteries from the toy. Dispose of
batteries safely. Do not dispose of
batteries in a fire. The batteries may
explode or leak.
• Never short-circuit the bat-
tery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the toy before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
Battery
Compartment
Door
• Locate the battery compart-
ment door on the bottom of
the streetlamp.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
• Insert three “AA” (LR6)
alkaline
batteries, as indicated inside the
battery compartment.
Hint:
We recommend using
alkaline
batteries for longer life.
• Replace the battery compartment
door and tighten the screw with
a Phillips screwdriver. Do not
over-tighten.
• When sounds or lights from this toy
become faint or stop, it’s time for an
adult to change the batteries!
Bottom View
Shown Actual Size
