Battery
Installation
In exceptional circumstances, batteries
may leak fluids that can cause a chemical
burn injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
Battery Safety
Information
1,5V x 3
AA (LR6)
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities.
• Loosen the screw in the battery
compartment door and remove the door.
• Insert three AA (LR6)
alkaline
batteries.
• Replace the battery compartment door
and tighten the screw.
• If this toy begins to operate erratically,
you may need to reset the electronics.
Slide the power/volume switch off and
back on.
• When sounds or lights from this toy
become faint or stop, it’s time for an adult
to change the batteries.
For longer life,
use
alkaline
batteries.
