5
Assembly
1
2
4
• Slide the socket on a foot onto the tapered
end of a side rail.
Side Rail
Foot
• Fit the peg on the inside of the foot to the
hole in the end of the side rail.
Hint:
Each foot is designed to fit the side
rails one way. If a foot does not seem to fit,
remove it and assemble it to the other
side rail.
• Repeat this procedure to assemble the
other foot to the other side rail.
3
• Fit the pegs on the footrest to the
side rails.
• Insert a M5 x 50 mm screw through the
outside of each side rail and into the ends
of the footrest. Tighten the screws.
Footrest
Screws
IMPORTANT!
Before each use or assembly,
inspect this product for damaged hardware,
loose joints, missing parts or sharp edges.
Do not use the product if any components
are broken or missing. Do not use access-
ories or replacement parts other than those
approved by the manufacturer.
4
• Insert the ends of the kickstand into the
socket in each foot.
Kickstand
