background image

Assembly

• Fit the pocket on the back of the pad onto the seat back.
• Fit the waist belts through the smaller slots in the pad.

9

Waist Belts

Pad

Slot

Slot

23

• Lift the bottom of the pad.
• Insert the pad elastic loops through the holes in the 

seat bottom.

• Insert the crotch belt through the slot in the pad.
• From under the seat, fit the elastic loops onto the tabs on

the seat bottom.

24

• Insert a #8 x 1

1

/

4

" screw through each frame hub and into

the swing tubes. Tighten the screws with a Phillips screw-
driver. Do not over-tighten.

• Again, push down on the seat to be sure the seat is secured

to both frame hubs.

Frame

Hubs

22

Pad

Elastic

Loops

Holes

Crotch

Belt

• Position the seat assembly so that the front of the seat is

toward the curved front base.

• While pressing the buttons on the swing tubes, insert them

into the frame hubs. Push the swing tubes up until the 
buttons 

“snap”

into the hole in the frame hubs.

• Push down on the seat to be sure the seat is secured in

both frame hubs.

Swing

Tube

Front

of Seat

Curved

Front

Base

Push

Button

Frame Hub

21

Seat Bottom

#8 x 1

1

/

4

” Screw - 2

Shown Actual Size

B0323 Quick Response Swing  9/24/02  1:03 PM  Page 9

Содержание B0323

















Отзывы: