3
6
ASSEMBLY
2
Base Wire
Colored
Dot
Base Wire
Soothing
Unit
Footrest
Wire
Colored
Dot
• Position the seat back wire
with the toy bar sockets upright
.
• Fit the seat back wire completely onto the base wires, so that each end
covers the colored dot on each base wire.
•
Make sure the plastic covers on the seat back wire cover the colored
dots on the base wire.
Colored
Dot
Plastic
Cover
Base
Wire
Toy Bar
Socket
Seat Back
Wire
Back View
Base
Connector
Base
Wire
• Position the footrest wire so that the soothing
unit is upright.
• While flexing the base wires toward each other,
hook the footrest wire onto the ends of the base wires.
• Push the footrest wire down completely
below the colored dots
on the
base wires.
• Make sure the small tabs on the left and right base wires are secure in the
base connector holes (see inset). If the small tabs are not secure in the base
connector holes, you have assembled the base incorrectly. Disassemble all
parts and refer back to Assembly step 1.
