Operating Manual Freeze Dryer
ALPHA 1-4 LD-2 / 2-4 LD-2
, Version 0203, Page 26
3.4
Connection of the Vacuum Measuring Sensor TPR 265
Units without a vacuum measuring sensor can easily be retrofitted with the sensor
TPR 265
for measuring the vacuum. To do this the plug of the measuring sensor is
inserted into the socket on the back of the unit.
The measuring sensor is supplied with a T-piece with small flange connections. With
this T-piece the sensor is connected to the connection at the rear panel of the unit.
The vacuum measuring sensor must be adjusted If another value other than
“
A
”
(atmosphere) is displayed after switching on the unit (see point 6.6
“
Adjustment of
vacuum sensor TPR 265
”
).
Connecting plug for
vacuum measuring
sensor TPR 265
Vacuum measuring
sensor TPR 265
Содержание 101041
Страница 1: ......
